Rubber Expansion Joints: 1.Flange Material:Ductile Iron, Carbon Steel and stainless steel 2.Standard of Flange:ANSI,DIN,JIS,GB and so on (as your technical drawings) 3.Pressure: 5kg 10kg 16kg 25kg
Features:
1. It is easy to install and maintain because of the small volume and flexibility.
2. Structural noise transmission can be reduced with the restrict and flange non-parallelism.
3.The inner seamless high-pressure rubber joint is developed by our own which prevents corrosive medium from etching the inner wall of the rubber joint in high temperature, acid, alkali and oil resistant pipeline, thereby it also can extend its service life span.
4. We can assure the quality and if you put up some other specific requirement, we will take them into consideration too.
5. Our products have been receiving considerable acceptance all over the world.
Rubber Expansion Joints:
1.Flange Material:Ductile Iron, Carbon Steel and stainless steel
2.Standard of Flange:ANSI,DIN,JIS,GB and so on (as your technical drawings)
3.Pressure: 5kg 10kg 16kg 25kg
Installation Date Table:
| Nominal Diameter mm | Length mm | Axial displacement | Lateral displacement | Deflection angle | |
| extension | compression | ||||
| 50 | 165 | 30 | 50 | 45 | 40° |
| 65 | 175 | 30 | 50 | 45 | 40° |
| 80 | 175 | 30 | 50 | 45 | 40° |
| 100 | 225 | 35 | 50 | 40 | 35° |
| 125 | 225 | 35 | 50 | 40 | 35° |
| 150 | 225 | 35 | 50 | 40 | 35° |
| 200 | 325 | 35 | 60 | 35 | 30° |
| 250 | 330 | 35 | 60 | 35 | 30° |
| 300 | 330 | 35 | 60 | 35 | 30° |
| 350 | 330 | 30 | 50 | 30 | 30° |
| 400 | 330 | 30 | 50 | 30 | 30° |
| 500 | 340 | 30 | 50 | 30 | 30° |
Products Photos Show:
